Installation/Set-Up Challenges for Mirror Screws with Polished Brass Disc Head

When using mirror screws with polished brass disc heads, some common installation or setup challenges you may encounter include:

1. Proper Alignment: Ensuring that the mirror screws are accurately aligned to ensure the mirror hangs straight and level can be a challenge. Use a level during installation to ensure correct alignment.

2. Drilling Holes: Drilling holes in the wall to accommodate the mirror screws can be tricky, especially if you have hard wall surfaces like tile or concrete. Use the appropriate drill bit and technique for the specific wall material.

3. Cracking/Chipping: Polished brass disc heads are delicate and can crack or chip during installation if too much pressure is applied. Handle the screws carefully to avoid damaging the finish.

4. Weight Capacity: Consider the weight of the mirror and ensure that the mirror screws and wall anchors used can support the weight adequately. Exceeding the weight capacity can lead to the mirror falling and causing damage.

5. Finish Protection: Protect the polished brass finish of the disc heads during installation to avoid scratches or tarnishing. Use a cloth or tape to cover the discs while installing the screws.

By being mindful of these common challenges and taking appropriate precautions during the installation process, you can effectively use mirror screws with polished brass disc heads for your project.